BIEN AIROTOR - BORA L

BIEN AIROTOR – BORA L

Out of Stock

Highlights:

Airotor Handpiece

The range of Bora turbines combines cutting edge technology with exceptional ergonomics. The advanced performance for which they are renowned has been optimised even further and the purity of their lines make them simply unique. A perfect union of form and function for procedures of unprecedented efficiency and comfort. Bora turbines guarantee impeccable hygiene thanks to the Sealed Head air and water anti-retraction valves and perfect nebulisation provided by the six separate Accu-Spray air and water nozzles. Lastly, they are equipped with a Soft Push button, optimised to provide an easier tool change, and an Accu-Chuck clamp locking mechanism which reduces vibrations and noise. Fitted with an exclusive dual conductor LED system, our turbines provide uniform lighting of the working area, with the intensity of the light almost doubled thanks to brand new technology: hot-pressed multi-strand optical glass.

PREPARATION

A.REMOVING THE INSTRUMENT

Remove the rotary instrument from the chuck mechanism

B.PRE-DISINFECTION

External disinfection

Do not immerse the instrument in a disinfectant bath.

CLEANING

A.CLEAN UNDER RUNNING WATER AT?<38?C

B.REMOVING DIRT/DEPOSITS

Carefully remove all traces of dirt or deposits from the spray nozzles using the Bien-Air cleaning wire
Dry the nozzles with compressed air then dry the rest of the instrument with a cloth

Do not immerse in an ultrasonic cleaner

C.INTERNAL AND EXTERNAL CLEANING WITH SPRAYNET

Shake the?Spraynet?before use
Use the?Spraynet?attachment?1
(for 2-/3-way and 4-way turbines, see inset below)
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the?Spraynet?button down for?1 second
Clean the exterior of the turbine with a cloth soaked in?Spraynet

FOR 2-/3-WAY AND 4-WAY TURBINES ONLY

C’.CLEANING THE INSIDE WITH SPRAYNET FOR 2-/3-WAY AND 4-WAY TURBINES ONLY

Use the?Spraynet?attachment?2
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the?Spraynet?button down for?1 second

Spray into the opening as shown in the illustrations for ?2-/3-way? and ?4-way?

DISINFECTION

A.DISINFECTION USING SURFACE DISINFECTANT?(follow the manufacturer’s instructions for use)

Do not immerse the instrument in a disinfectant bath

B.THERMAL DISINFECTION?(follow the manufacturer’s instructions for use)

LUBRICATION

A.LUBRICATION WITH LUBRIMED

B.LUBRICATION WITH LUBRIFLUID

Shake the?Lubrifluid?before use
Use the?Lubrifluid?attachment?2,?3?ou?4depending on the type of instrument * (For 2-/3-way and 4-way turbines, see inset below)
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the?Lubrifluid?button down for?1 second
Then, run an operating test for 30 seconds at low speed to remove any surplus lubricant
Store immediately: store the instruments with the tip pointing downwards so that any oil residues can flow out

FOR 2-/3-WAY AND 4-WAY TURBINES ONLY

B’.INTERNAL LUBRICATION WITH LUBRIFLUID FOR 2-/3-WAY AND 4-WAY TURBINES ONLY

Use the?Lubrifluid?attachment?2
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the?Lubrifluid?button down for?1 second

Spray into the opening as shown in the illustrations for ?2-/3-way? and ?4-way?

STERILISATION

A.PLACE THE TURBINE IN A STERILISATION BAG

B.STERILISE IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS

Instruments bearing the “135?C” symbol can be sterilised in an autoclave

Only sterilise instruments which have been cleaned and lubricated

	Bien Air Bora L Air Rotor
	Bien Air Bora L Air Rotor + Unifix 4H L

BIEN AIROTOR – BORA L

Airotor Handpiece

Be the first to review “BIEN AIROTOR – BORA L” Cancel reply

Related Products

Mini Endo Block

Login

Signup

My Cart

Cookies Notice