SHOFU ALL CERAMIC PREPARATION KIT

Rs.7,200 Rs.6,475

10% Off
Close
Price Summary
  • Rs.7,200
  • Rs.6,475
  • 10%
  • Rs.6,475
  • Overall you save Rs.725 (10%) on this product
In Stock
Highlights:

All-ceramic Preparation Kit

Description
  • The All Ceramic Preparation kit is specially created with an exclusive range of diamond burs for simple, efficient and accurate tooth preparation for?full-ceramic, inlay/onlay and veneer restorations

 

  • The special selection of 17 burs are created for clinical application in:
  • 896,897:?Specially designed burs for the preparation of depth orientation grooves.
  • 896-?0.5mm depth for all ceramic laminate veneer preparation
  • 897-?1.0mm depth for anterior tooth, all ceramic crown preparation
  • 0836, 836V:?Designed to prepare the anterior tooth, buccal surface of upper and lower?pre-molar or cervical area on the lingual surface. Use 1/2 – 2/3 of the diameter,Head length 9mm, diameter 1.3mm with tapered angle of 4?
  • 0839, 839V:?Designed to prepare buccal and lingual surfaces of upper and lower molar teeth.For cervical area use 2/3 of the diameterHead length 9mm, diameter 1.5mm with tapered angle of 20?
  • 0893, 893V:?Designed for cutting upper / lower anterior tooth on lingual surface (to maintain?occlusal space) and lower pre-molar on occlusal area.Head length 4.9mm
  • 0899, 899V:?Designed to reduce an upper pre-molar and the occlusal surface of an upper/ lower?molar to maintain the occlusal space.Tapered 20? angle
  • 808V: Use this diamond bur after the preparation is finished to eliminate the free enamel in?the cervical area. Use a lower speed to avoid chipping the enamel.Head length 8mm
  • 0833, 833V:?Designed to slice cut at the interproximal surface or box preparation at the?interproximal surface of class II inlay restoration. Use ? the diameter, except when?preparing the lingual cervical area of a lower anterior tooth use 2/3 the diameter.Head length 9mm, diameter 1.1mm (at the top of working part) with tapered 4? angle
  • 0825, 825V,0826, 826V:?Designed to prepare the occlusal box-form of an upper / lower pre-molar and molar
  • 0826, 826V:?Used for occlusal box-form for upper and lower molar.Head length 3.5mm, diameter 1.5mm and 2mm with tapered 20? angle

 

Key Features

Key Features

Key Features:

Maximum recommended speed for the burs:
Less than 300,000 rpm: 0825, 0833, 0836, 0839, 0896, 808V, 825V, 833V, 825V, 893V
Less than 160,000 rpm: 0826, 0893, 826V, 893V
Less than 120,000 rpm: 0897, 0899, 899V
Recommended load: 0-0.8 N
Packaging

Packaging

Packaging :

  • 1 x 17pcs of Diamond Points FG in 2 different grits (Regular & Superfine)
Instructions for use

Instructions for use

Instructions for use:

  1. Begin with a slice cut in the interproximal area, using the long axis of the bur. Retract tissue with retraction cord after the slice cut.
  2. Reduce the incisal edge by 1.5 – 2.0 mm, angling the diamond toward the lingual to stay parallel with the incisal line.
  3. Prepare the labial surface by cutting lateral guide grooves 1.0 mm deep to guide the depth of the cut.
  4. Reduce the labial surface depth to match the lateral guide grooves.
  5. Prepare the labial and lingual cervical area, cutting from the lowest point of the cervical scallop mesially and distally on both surfaces. Ensure sufficient reduction in the center of the labial and lingual surfaces, avoiding excessive reduction in the interproximal subgingival cervical areas.
  6. Prepare the lingual space, being cautious not to cut too much of the axial lingual wall.
  7. Free enamel at the cervical area and prepare the shoulder margin. Smooth and finish the enamel, ensuring the bur is placed vertically on the shoulder margin surface and moved in the direction of rotation.
  8. Complete the preparation by envisioning the final shape while cutting.

Premolar (1st Bicuspid) Preparation:

  1. Reduce all four surfaces of the premolar, allowing for a slight undercut following the lingual inclination. The bur, correctly positioned against the occlusal plane, will tip toward the buccal surface.
  2. Reduce the apex of the buccal cusp, following inclined plane angles.
  3. Utilize premolar anatomy for the occlusal surface, similar to an anterior preparation.
  4. Create broad mesial and distal pits in the occlusal surface, reducing toward each interproximal direction.

Upper Molar Preparation:

  1. Reduce the occlusal surface to create space, using the bur’s top shape to cut the central groove and shape the side areas for crown pits.
  2. Employ the nipple part of the bur top to smooth and finish the overall edge of the occlusal and axial angle.

 

 

Reviews (0)
0 ★
0 Ratings
5 ★
0
4 ★
0
3 ★
0
2 ★
0
1 ★
0

There are no reviews yet.

Be the first to review “SHOFU ALL CERAMIC PREPARATION KIT”

Close
Close
Shop
0 Cart
Order
Close

My Cart

Shopping cart is empty!

Continue Shopping